EXIT Toys Deluxe spa Mode D'emploi page 15

heatingfunction. 1. Unscrew the filter case by turning it counter-clockwise. Take out
the filter cartridge from the case. 2. Rinse off the filter cartridge with a garden hose.
If the filter cartridge remains dirty and discoloured, the filter cartridge should be
replaced. 3. Put back the cleaned filter cartridge into his case and screw it to the spa.
7.2 Disinfection
Water Sanitation: To sanitize the spa water, we suggest using an active oxygen-based
treatment or bromine placed in a floating dispenser. (Dispenser sold separately) If
water is heavily polluted you should not use spa. Clean spa with with specialist UV
lighting equipment. Seek professional advice and guidance before doing this.
Attention:
Detergent residues and dissolved solids from bathing suits and chemicals may build
up on the spa walls, Use soap and water to clean the walls and rinse thoroughly with
a garden hose using a direct powerful waterspray
7.3 Drainage and storage
1). Check the stopper on the bottom of the spa and the drain cap.
2). Unscrew the drain cap.
3). Remove the stopper on the bottom of the spa. Completely drain all water from
the spa spa.
4). Once empty, the spa can be cleaned with soap and water.
Storage
5). Press the bubbling button to blow out the water inside the jet holes. Unplug the
pump, remove the filter cartridge from the inner wall of the spa.
6). Use a towel to wipe off the spa, dry 24 hours.
7). Unscrew the valves to deflate the spa.
8). Fold the spa.
It is recommended that store the SPA in its original package in a warm dry place.
7.4. Repair kit
Little holes or puncture can be repaired with the repair kit included and glue reserved
to spa liner.
1). Find the leak.
2). Thoroughly clean the area surrounding the leak.
3). Cut a piece of repair material in round shape, which should be larger than the
damaged area.
16
MSP-35101-V02