Prepare For Installation - U.S.Robotics Wireless MAXg USB Adapter Guide D'installation

U.S. Robotics Wireless
Installation
Package Contents:
USR5421 Wireless MAXg USB Adapter
Quick Installation Guide

Prepare for installation

You must have administrator rights on your computer in order to install this product.
You will need to install this Installation CD-ROM on all the PCs on which you plan to install
Wireless MAXg USB Adapters.
You must be using Windows XP (Service Pack 1 or higher) or 2000 (Service Pack 4 or higher).
For the most updated information, visit: http://www.usr.com/support
You can also refer to the User Guide on the U.S. Robotics Installation CD-ROM for more detailed
information.
If you are installing only a Wireless MAXg USB Adapter, go to the
section entitled Installing JUST the Wireless MAXg USB Adapter.
Installing BOTH a Wireless MAXg R
Wireless MAXg USB Adapter
Step One: Connect the Wireless
A. Turn off your computer and your cable or DSL modem.
Disconnect the modem's Ethernet cable from your com-
puter and connect it to the WAN port of the Wireless
MAXg Router.
B. Connect the supplied Ethernet cable to the Network Interface Card of your computer and to
one of the LAN ports of the Wireless MAXg Router.
C. Connect the antenna to the Wireless MAXg Router.
D. Connect the power adapter to the Wireless MAXg Router and to a standard wall power out-
let. Turn on your computer.
MAX
g USB Adapter
Installation CD-ROM which includes User Guide
MAX
g Router
the
outer and
1