Step 4 : Settings; Easy Setting; "Wireless" Connection; Inserting Or Removing Media - Panasonic DMP-BDT500 Mode D'emploi De Base

STEP 4 : Settings

Easy Setting

After connecting your new player for the first time
and pressing [Í], a screen for the basic settings
will appear.
Preparation
Turn on the television and select the
appropriate video input on the television.
1
Press [Í].
Setup screen appears.
Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the
unit is still consuming a small amount of
power.
2
Follow the on-screen instructions and
apply the settings.
≥ You can perform this setup anytime by selecting "Easy
Setting" in the Setup menu. ([HOME]
Settings" "System")
≥ If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then setting information on the TV such as "On-Screen
Language" is acquired by this unit.
≥ About "Analog Audio Output" setting:
Initial setting is set to "2ch (Downmix) + 5.1ch", so you will
need to select "7.1ch" if using the 7.1ch output.
Easy Network Setting
After completing "Easy Setting", you can perform
"Easy Network Setting".
Select "Wired" or "Wireless".
∫ "Wired" connection
Follow the on-screen instructions to apply your
connection settings.

∫ "Wireless" connection

Select "Search for wireless network" or "WPS
(PUSH button)", then follow the on-screen
instructions and apply the settings.
10
(10) VQT3V94
Inserting or removing
Playback
media
Notes
≥ When inserting a media item, ensure that it is
facing the right way up.
≥ When removing the SD card, press the centre
of the card and pull it straight out.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
≥ Use the front USB port when you connect a
"Setup" "Player
USB memory or a USB HDD. The USB port on
the rear panel is only for the Communication
Camera.
CAUTION
Do not place objects in front of the unit. The disc
tray may collide with objects when it is opened,
and this may cause malfunction.