Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Dip switch 1: one address
Dip switch 0: 4 channels
DMX ADDRESS
Function
6. OPERATION
After connecting the device to the mains and switching the main circuit breaker, the ERX-4 is ready for use.
You can control the desired channel via you lighting controller.
7. CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
1
any one of DIP switch 1-9 is on, DMX parallel
All of DIP switch 1-9 is off, auto parallel
any one of DIP switch 1-9 is on ,DMX
All of DIP switch 1-9 is off , Auto
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
FUNCTION
2
3
4
5
6
7
8
9
20/39
10
1
0
00035719.DOC, Version 1.1
Publicité
Table des Matières
