FORS GKT 604 ES Instructions De Montage Et D'utilisation page 18

Assembly instructions
Dimensions in mm
18
Front
Clips
• Drive the clips into the worktop cut-out at
the intervals indicated. It is not necessary
to adjust the height due to the horizontal
stop.
• Important: The horizontal drive of the clips
must be flush with the worktop (avoid the
risk of fractures).
• Position the hob according to the illustra-
tion on the left side (a), align it (b) and
insert the clips (c).
• Screws may be used to fasten the clips.
Important:
There is a risk of breakage if the hob is
canted or subjected to stress during
installation!
Minimum distance to adjacent walls
Cut-out dimension
Outer dimensions of the hob
GKT 604 580 mm x 510 mm
GKT 642 580 mm x 510 mm
GKUT 642 605 mm x 545 mm
Cable routing in rear wall
Installation height
GB