Ce Declaration Of Conformity - Facom V.CE100F Notice Originale

PLACING THE MACHINE IN SERVICE
LUBRIFICATION
Always use of an air line lubricator with these machine. We recommended the
following Filter-Lubricator-Regulator Unit: FACOM N.580.
Every eight hours' operation, if a lubricator is not used on the compressed air
network, inject 1/2 to 1cm through the machine's inlet connection.
3
NEVER USE THE ANGLE CUT-OFF TOOL WITHOUT THE SAFETY GUARD
Model Deburring
wheel
mm
V.CE100F Ø 100
Model Rated speed
rpm
V.CE100F 17000
* k = measurement uncertainty in dB ** k = measurement uncertainty in m/s²
WE, FACOM S.A.S., 6/8 RUE GUSTAVE EIFFEL - 91 420 MORANGIS - FRANCE, DECLARE UNDER OUR OWN RESPONSIBILITY THAT THE PRODUCT V.CE100F
– FACOM Ø 100 MM EXTENDED CUT-OFF TOOL
- IS IN CONFORMITY WITH THE «MACHINERY» DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD EN ISO 11148-7: 2012
The undersigned is responsible for compilation of the technical fi le and makes this declaration on behalf of Facom.
NU-V.CE100F_0616.indd 8
Motor power Center hole max. wheel
rating diameter wide
kW mm mm
0,7 max. 10 max. 2
Air Working
consumption pressure
l/min bar
113 6,2

CE DECLARATION OF CONFORMITY

EMERGENCY
GATE VALVE
?
10 mm
Ø 22,23 mm
Noise level
Pressure dB(A) Power dB(A)
k* k*
88 3 99 3
Weight Dimensions
kg mm
1,74 400 x114 x 71
Vibrations level
m/s
2
Pressure dB(C)
k* k**
130 3 2,4 1,44
Markus Rompel
20.03.2016
Director Engineering
22/06/2016 14:37:05