Dell QLogic QLE2740-DEL Guide D'utilisation page 88

3–Configuration de Fibre Channel
Configuration d'un FA-PWWN
3: Frame Size
4: Enable HBA Hard Loop ID
5: Hard Loop ID
6: Loop Reset Delay (seconds)
7: Enable BIOS
8: Enable Fibre Channel Tape Support
9: Operation Mode
10: Interrupt Delay Timer (100 microseconds)
11: Execution Throttle
12: Login Retry Count
13: Port Down Retry Count
14: Enable LIP Full Login
15: Link Down Timeout (seconds)
16: Enable Target Reset
17: LUNs per Target
18: Enable Receive Out of Order Frame
19: Enable LR
20: Enable Fabric Assign WWN
21: Commit Changes
22: Abort Changes
Enable Fabric Assign WWN Menu
1: Enable
2: Disable (current)
Après avoir actualisé le commutateur Brocade, Adapter Information
(Informations sur l'adaptateur) indique le nom du port comme indiqué dans
l'exemple suivant.
QConvergeConsole
CLI - Version 1.1.3 (Build 22)
FC Adapter Information
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please enter selection: 20
QConvergeConsole
Version 1.1.3 (Build 22)
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please enter selection: 1
73 BK3254601-02 F