Package Contents; Preparation - Smartpond 52532 Instructions D'utilisation

• Do not submerge the transformer and sensor.
• To reduce the risk of fire or injury, keep lamp away from materials that
may burn.
• Always disconnect light from the power source before beginning any
maintenance or work on the light.
• Inspect cord for damage before installation and/or maintenance.
Replace the entire light/transformer assembly if damage is found.
CAUTION
• Use a proper power source as indicated on the transformer label.
• Keep the cord away from high temperatures or other heat sources.
• Do not lift the light or the transformer by its power cord.
• This light assembly is not intended for use in swimming pools or hot tubs

PACKAGE CONTENTS

Part Description Qty
A Lights
B Sensor
C Transformer

PREPARATION

Before beginning assembly or operation of product, make sure all
parts are present. Compare parts with package contents list and
diagram. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact Customer Care
for replacement parts.
Estimated assembly time: 5 minutes.
•
No tools required for assembly.
•
3 VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.
A
1
1
1
B
C