7: Auto-Tuning The Tv - Sony BRAVIA KDL-S40A11E Mode D'emploi

7: Auto-tuning the TV

After selecting the language and country/region, a
message confirming the TV start auto-tuning appears
on the screen.
You must tune the TV to receive channels (TV
broadcasts). Do the following to search and store all
available channels.
1
4
1
Press OK to select "Yes".
Do you want to start
automatic tuning ?
Yes
m
Digital auto-tune display
Number of Services found
Searching. 40%
m
Analogue auto-tune display
Auto Tuning
Programmes found:
The TV starts searching for all available digital
channels followed by all available analogue
channels. This may take some time, please be
patient and do not press any buttons on the TV or
remote.
Once all available digital and analogue channels
have been stored, the TV returns to normal
operation, displaying the digital channel stored on
channel number 1. If no digital channels are
found, the analogue channel stored on channel 1 is
displayed.
When a message appears for you to confirm the
aerial connections
No digital or analogue channels are found. Check
all the aerial connections and press OK twice to
start auto-tuning again.
2
The Programme Sorting menu appears on
the screen.
Note
If some digital channel is found, this step will
not appear
3
To change the order in which the channels
are stored on the TV. See page 30.
4
Press MENU to exit.
The TV has now tuned in all the available
channels.
No
14
Searching...
13
GB