Luma ACTIVE & BOOST Mode D'emploi page 26

26
ADDITIONAL INFORMATION
Switching on
• After switching on the LUMA BOOST, the battery level is shown for
three seconds (depending on the battery level 1, 2, 3 or all 4 red back
LEDs are on).
• If the button is pressed during these three seconds, the battery level
indication is interrupted.
• After the battery level indication, the back lights automatically switch
back into the last used mode (by doing so, the favorite mode must not
be selected again).
• The front lights however always start in mode one when turned on.
During operation
• If the battery level drops below 50% during use, the front
LED flashes for a few seconds to warn the wearer.*
• If the battery level drops below 25% during use, the front lights are
switched to the lowest mode (power saving mode). You can still
manually switch back to the desired lighting mode.*
• If you switch the mode of your back lights, the front lights flash shortly
to indicate that the switch of the back lights was successful.
* Battery level detection may vary depending on temperature and modus.