Automatique Mode; Dmx Mode - Evolite EVO Spot 60-CR Mode D'emploi

o Automatique Mode
Use the DOWN or UP keys to access the AUTO PLAY menu. Press ENTER and
select AUTO RUN. Confirm by pressing ENTER. Use the UP & DOWN keys for
one of the 9 programs. Press ENTER to confirm your choice. Then select
ALONE or MASTER according to your configuration, then move ENTER again.
The automatic program starts. Repeat to select another automatic program
from 1 to 9.
Selecting AUTO mode with sound detection
Use the DOWN or UP keys to access the AUTO PLAY menu. Press ENTER and
discover MUSIC RUN. Confirm by pressing ENTER. Use the UP & DOWN keys
for one of the 9 programs. Press ENTER to confirm your choice. Then select
ALONE or MASTER according to your configuration, then move ENTER again.
The automatic program for starting and reactivity to the son. Repeat to select
another automatic program from 1 to 9.
o DMX mode
Each device can be controlled by a DMX-512 standard.
You must "address" each device through the "A001" menu. The filled-in
address is then the base address, the address from which the device will
respond.
If two devices are addressed to the same DMX address; they then behave
identically, responding to the same DMX channels.
DMX mode selection:
Use the DOWN or UP keys to access the DMX Addr menu. Press ENTER to
access the desired DMX address. Press ENTER to confirm.
You must select the number of DMX channels with which you want to control
the device (10 or 12 channels).
Use the DOWN or UP keys to access the DMX Mode menu. Then press ENTER
to enter the 10 or 12 channel mode. Press ENTER to confirm.
The device is in DMX mode, and no DMX signal is present, the display flashes.
Then connect a DMX cable as input.
21
Evo Spot 60-CR User's Manual Ver. 1.00 Page