Vivobike VM26 Manuel D'instructions page 19

Ⅰ. Conditions for riding
This pedal electric assistance bicycle is designed for riding on road or riding on a paved surface where the tyres do
not lose ground contact. It must be properly maintained according to the instructions found within this book;
The maximum weight of the rider, bike and load is required to be less than 130kg.
Safe cycling and safety tips:
Before you ride your pedal electric assistance bicycle always make sure it is in a safe operating condition.
Particularly check that your:
•
Nuts, bolts, quick-release and parts refastened tight and not worn or damaged
•
Riding position is comfortable
•
Brakes are operating effectively
•
Steering is free with no excessive play
•
Wheels run true and hub bearings are correctly adjusted
•
Wheels are properly secured and locked to frame/fork
•
Tyres are in good condition and inflated to correct pressure
•
Pedals are securely tightened to pedal cranks
•
Gears are correctly adjusted
•
All reflectors are in position
WARNING WHEELS: Every six months, your pedal electric assistance bicycle should be professionally
checked to ensure that it is in correct and safe working order. It is the responsibility of the rider to
ensure all parts are in working order prior to riding. It is very important to check the rim wear
monthly and monitor the rim wear line, if these grooves become invisible, the rim is past its safe
working life. A severely worn rim is very dangerous and must be replaced. Adjust the brake shoes
accordingly to make the clearance at 1-1.5mm from the track of rim.
REGULAR ATTENTION MUST BE PAID TO THE HUB MOTOR SPOKE TENSION.
Warning: You are warned that you assume the risk for personal injury, damage or losses if you
breach the above conditions and, the warranty will be void automatically.
19/76