Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
F
SAFETY NOTES
SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS
Measurements through glass or plastic windows; dirty laser emitting windows; after the instrument has
been dropped or hit. Please check the accuracy.
Large fluctuation of temperature: If the instrument will be used in cold areas after it has been stored in
warm areas (or the other way round) please wait some minutes before carrying out measurements.
CARE AND CLEANING
Handle measuring instruments with care. Clean with soft cloth only after any use. If necessary damp
the cloth with some water. If the instrument is wet clean and dry it carefully. Pack it up only if it is per-
fectly dry. Transport in original container / case only.
ELECTROMAGNETIC ACCEPTABILITY (EMC)
It cannot be completely excluded that this instrument will disturb other instruments (e.g. navigation sys-
tems); will be disturbed by other instruments (e.g. intensive electromagnetic radiation nearby industrial
facilities or radio transmitters).
CE-CONFORMITY
The instrument has the CE-mark according to EN 61000-6-1:2007 , EN 61000-4-2:1995,EN 61000-4-
3:2006, EN 61000-6-3:2007 .
SAFETY INSTRUCTIONS
·
Follow up the instructions given in the user manual.
·
Use the instrument for measuring jobs only.
·
Do not open the instrument housing. Repairs should be carried out by authorized workshops only.
Please contact your local dealer.
·
Do not remove warning labels or safety instructions.
·
Keep the instrument away from children.
·
Do not use the instrument in explosive environment.
·
The user manual must always be kept with the instrument.
16
Publicité
Table des Matières
