Controls; Appliance Controls; Adjust Temperature Inside The Appliance; Additional Information On The Temperature - Amica EKGCS 387 950 Notice D'utilisation

CONTROLS

Appliance controls

The control panel is shown in figure 10. For reference it is also shown
below:

Adjust temperature inside the appliance

The control panel is located inside the appliance on the top wall of the
refrigerator compartment. It allows you to change the temperature in
both chambers. Touch few times
on the display set value will flash.
If You want to turn off the appliance, touch
on the appliance using it.

Additional information on the temperature

• The temperature inside the appliance is influenced by many factors.
How you set the temperature control dial depends on the ambient
temperature, sun exposure, how often you open the door and the
amount of food stored. The middle setting of the dial is most optimal
in most cases.
• Do not put food into the fridge freezer before it has reached its oper-
ating temperature, which takes minimum 4 hours.
• Do not change the temperature settings due to the change in the
season of the year. The ambient temperature increase will be detect-
ed by the sensor and the compressor will be switched on automati-
cally for a longer period of time in order to maintain the temperature
set inside the chambers.
• The slight changes in temperature are perfectly normal and may oc-
cur, for instance during the storage of great quantities of fresh prod-
ucts in the fridge, or when the door is open for a longer period of
time. This will not affect the condition of the stored foodstuff, and the
temperature will quickly return to its set value.
1 2 3 4 5
sensor to change the temperature,
- 20 -
6 7
sensor. You can also turn