Mains Connection; Disconnecting The Mains; Climate Range - Amica EKGCS 387 950 Notice D'utilisation

Mains connection

• Prior to connection, it is recommended to set the temperature control
knob to an „OFF" or other position that disconnects the appliance
from the power supply (See page with the control description).
• This appliance should be connected to AC 220-240V 50Hz supply
socket. The socket must be fitted properly, and must be supplied with
an earthing conduit and a 10A fuse.
• It is a legal requirement that the appliance is properly earthed. The
manufacturer will not be held liable for any damage or injury which
may result from the failure to fulfil this requirement.
• Do not use adapters, multiple sockets and two-wire extension leads.
If it is necessary to use the extension lead, it must be equipped with
a protection ring and a single socket and must have a VDE/GS safety
certificate.
• If an extension lead is used (with a protection ring and safety certif-
icate), its socket must be located at a safe distance, away from the
sinks, and must not be in a place where it could be flooded by water
or waste water.
• See the type plate at the lower part of the internal wall of the appli-
ance for detailed specifications**.

Disconnecting the mains

Make sure the appliance can be easily disconnected from the mains,
either by pulling the plug out of the mains socket, or by switching the
two-pole switch off (fig. 9).

Climate range

The information about the climate range of the appliance is provided
on the rated plate. It indicates at which ambient temperature (that is,
room temperature, in which the appliance is working) the operation of
the appliance is optimal (proper).
Climate range
* Only free-standing appliances
** According to the model
SN
N
ST
T
Permissible ambient temperature
from +10°C to +32°C
from +16°C to +32°C
from +16°C to +38°C
from +16°C to +43°C
- 17 -