Play From Bluetooth Device - Krüger & Matz KM1663.1 Mode D'emploi

Connect power
oPeRATIoN
TURN oN
Press STANDBY button to turn the unit on. The device will switch to the last selected
source.
Switch to standby mode
Press and hold
Eco Power indicator turns on.
Setting the clock
1. In standby mode, press and hold CLOCK button to activate the clock setting
mode. [CLOCK SET] scrolls on the display, and the [24] 24-hours time format
appears.
2. Press /
(time format), and press CLOCK button to confirm. The hour digits begin to blink.
3. Press /
4. Press CLOCK button to confirm. The minute digits begin to blink.
5. Press /
6. Press CLOCK button to confirm.
Adjusting the display Brightness
In standby mode, press the dIM button to select brightness level.

PLAy FRoM BLUeTooTH deVICe

Pairing Bluetooth enabled devices
To connect your Bluetooth device to the unit, you need to pair the device to the unit.
Pairing needs only to be done once.
Note:
• The operational range between this unit and a Bluetooth device is approximately
22
STANDBY to switch the unit to Eco Power standby mode. The red
button on the remote control or front panel to select 12/24 mode
button on the remote control or front panel to set the hour.
button on the remote control or front panel to set the minutes.
Caution:
• Ensure that the power supply voltage
corresponds to the voltage printed on
the back or the underside of the unit.
• Before connecting the AC power cord,
ensure you have completed all other
connections.
Connect the AC power cord to the wall
socket.
Owner's manual