Télécharger Imprimer la page

T+A P 1230 R Mode D'emploi page 31

Publicité

Les langues disponibles

Les langues disponibles

The following table shows the remote control buttons and their functions when controlling the unit.
F1
/
Press briefly 1x
Press briefly 2x
Short press
Long press
*)
To switch from AUX 1 to AUX 2 using the F12 / F6 handset you need to press the AUX button quickly two
times ("double-click").
Notes on the remote control system:
Switching the remote control address:
Virtually all modern Hi-Fi and video equipment can be
remote-controlled using an infra-red system. However, it
is an unfortunate fact that only a limited number of infra-
red codes is available, and a vast range of manufac-
turers uses them.
It often occurs that remote control system codes overlap,
especially if household devices made by different com-
panies are used together and two of them happen to
share the same remote control code. For example, you
may find that the Hi-Fi system responds to the remote
control handset supplied with your TV or video recorder.
F6
F12
/
Press briefly 1x
Press briefly 2x
Short press
Long press
Function
Switches remote control handset between Hi-Fi, TV
and VCR operation
Switches unit on and off
Switches loudspeakers alternately on and off
Brief press:
Switches loudspeakers cyclicy on and off
A
B
A+B
Long press:
PA 1230 R, PA 1530 R only:
Switches the loudspeaker outputs OFF (Mute
function)
P 1230 R only:
PRE 2 pre-amplifier output ON / OFF
Switches all loudspeakers off
Switches pre-amplifier output on and off (P 1230 R
only)
Direct source select buttons:
TAPE 1
TAPE 2
CD
If the amplifier is switched off, selecting
TUNER
a source device switches the amplifier
on and also selects the corresponding
TV
source device.
AUX 1
AUX 2 *)
Volume control rocker
Switches LOUDNESS on and off
Switches FLAT mode on and off
 Hi-Fi equipment offers a solution to this
problem, as the units can be switched to a different
remote control level using the RC 1 code converter.
The remote control level of the F12 / F6 or F1 now has
to be set up to match the level of the Hi-Fi unit (see
remote control operating instructions).
31
OFF

Publicité

loading

Produits Connexes pour T+A P 1230 R

Ce manuel est également adapté pour:

Pa1230 rPa 1530 r