Safety Precautions - KONIG ONSTAGE OSP-TTA210 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
Note: CDs cannot be burned directly from the Audacity application. Other CD burning applications should be
used.
FAQ:
Software:
Q: I Cannot listen to the record while recording
A: Please activate "Software Playthrough" in Audacity as shown in IM.
Check the record source (USB Audio Codec) as shown in IM.
Check the volume settings of your computer.
Q: I Cannot store songs as MP3
A: Please download LAME MP3-Codec from the internet.
Q: I Cannot record
A: The player has to be connected with the computer first, then Audacity may be started.
Q: I Can only record MONO
A: This occurs mostly with VISTA. Please select "stereo", not "mono" or "microphone", in Windows
configuration recording source.
Player:
Q: The sound is crackling
A: Please make sure that this player is connected to a high-level-input of your amplifier. High-level inputs
are: CD, AUX and TAPE. The input PHONE is not suitable. The player has a built-in pre-amplifier.
Clean the stylus and the vinyl.
Check for correct counterweight setting.
Check for correct anti-skating level.
Q: Direct coding is not possible
A: The USB stick/card is write-protected.
Check the correct file system (FAT16).
Q: Direct coded songs are oversteered when recorded
A: Check for the correct recording level, see point 20 of IM.

Safety precautions:

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and
are hereby recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products should
not be mixed with general household waste. There is a separate collections system for these products.
To reduce risk of electric shock, this product should ONLY be opened
by an authorized technician when service is required. Disconnect the
product from mains and other equipment if a problem should occur.
Do not expose the product to water or moisture.
6

Publicité

Table des Matières
loading

Table des Matières