Star Progetti HELIOSA 996 Mode D'emploi page 10

3. ESTRACT THE BULB FROM THE SPRING CLIPS
5. IF WORN, APPLY THE SPARE HEAT-ELASTIC CAPS TO
REPLACE THOSE WHICH HAVE BEEN REMOVED. STRIP
THE CORDS (5-6 mm), APPLY THE NEW SPARE FASTONS
AND FASTEN THEM TO THE CORD.
4. REMOVE THE 2 BULB EXTREMITY HEAT-ELASTIC
CAPS AND DISCONNECT THE TWO FASTONS
CONNECTING CORDS TO THE BULB. IF THE CAPS USED
DISPLAY SIGNS OF WEAR AND TEAR, THESE MUST BE
REMOVED BY CUTTING THE CORDS NEXT TO THE 2
FASTONS.
6. CONNECT THE MALE FASTONS TO THE NEW BULB
TO THOSE OF THE TWO CORDS. COVER THEM WITH
THE CAPS AND REPOSITION THE BULB IN THE SEAT
OF THE TWO SPRING CLIP. DO NOT TOUCH THE BULB
WITH YOUR BARE HANDS. REASSEMBLE THE DEVICE
BY PERFORMING THE ABOVE TASKS IN REVERSE
ORDER.
10