Tintometer Lovibond TC Série Mode D'emploi page 15

14. Remove lock.
15. Reinsert hinge bushing.
16. Transfer covers to
the opposite side.
17. Transfer plug
and bushing.
18. Remove bushing.
19. Insert the lock as shown
in the illustration.
TC 140 G / TC 256 G_3 12/2020
15
14
16
17
18
19
20. Turn the lock 90°
clockwise.
21. Reinsert hinge bushing.
22. Turn the lock further -
approx. 3° clockwise.
23. Insert pin.
Note on point 23
After insertion, the pin's cross pin must
be engaged in the groove of the catch.
24. Screw in the screw and
attach the cover cap.
25. Insert the key.
Turn the key 90°.
GB
21
20
23
22
24
25
15