Before Operation - Tokai LAR-100B Manuel D'utilisation

Selecting fine audio equipment such as the unit you have just purchased is only the start of your musical
enjoyment. Now it is time to consider how you can maximize the fun and excitement your equipment offers.
We want you to get the most out of your equipment by playing it at a safe level. One that lets the sound
come through loud and clear without annoying blaring or distortion - and, most importantly, without affecting
your sensitive hearing.
Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of sound. So
what sounds «normal" can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion we want
you listening for a lifetime.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Take a minute to do this now; it will help to prevent hearing damage or loss in the future. After all, we
want you listening for a lifetime.
ABOUT THIS MANUAL
This product features a number of sophisticated functions ensuring superior reception and operation. All
are designed for the easiest possible use, but many are not self-explanatory.
This operation manual is intended to help you benefit fully from their potential and to maximize your
listening enjoyment.
We recommend that you familiarize yourself with the functions and their operation by reading through
the manual before you begin using this product. It is especially important that you read and observe the
"precaution" as follows.
In this operation manual, the Basic Operation for each sound source is outlined at the beginning of its
explanation, covering simple operation for that source, such as merely playing music.
PRECAUTION
1. Read through this instruction manual before installation and use.
2. Do not touch the power plug with wet hand.
3. Switch off the main power when the unit is not in use. (Disconnect the power plug from the power outlet
when you do not intend to use the unit for a prolonged period of time.)
4. Do not open the cover or touch any of the components exposed out of the unit, only for qualified
technicians.
5. Do not expose the unit under direct sunlight or nearby objects that radiate heat to avoid damage to the unit.
6. Do not place the unit in moist and humid conditions, which affect the pick-up of the unit.
7. Clear the panel and case with soft dry cloth only, do not apply any kind of thinner, alcohol or sprays.

1. BEFORE OPERATION

EN-13