Layout And Items Supplied; Technical Data; Operation - EINHELL TE-CL 18 Li Mode D'emploi D'origine

When shipping or disposing of batteries and
cordless tools, always ensure that they are
packed individually in plastic bags to prevent
short circuits and fi res.
Keep this safety information in a safe place.

2. Layout and items supplied

2.1 Layout (Fig. 1)
1. On/Off switch
2. Setting wheel
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
•
Battery-powered lamp
•
Original operating instructions
•
Safety information
Separately available accessories
18V 1.5Ah P-X-C lithium-ion battery
18V 2.0Ah P-X-C lithium-ion battery
18V 2.6Ah P-X-C Plus lithium-ion battery
18V 3.0Ah P-X-C lithium-ion battery
18V 4.0Ah P-X-C lithium-ion battery
18V 5.2Ah P-X-C Plus lithium-ion battery
18V P-X-C charger
Explore battery + charger options at
einhellUSA.com
Anl_TE_CL_18_Li_SPK7_USA.indb 10 Anl_TE_CL_18_Li_SPK7_USA.indb 10
EN

3. Technical data

Power supply: ......................................18 V
Number of LEDs: .............................................. 3
Lumens: ....................................................270 lm
Weight: ....................................... 0.66 lbs (0.3 kg)

4. Operation

4.1 Mounting on the battery (Fig. 2)
•
Push the lamp onto the battery until it snaps
into place.
•
To separate the battery again, press the
battery's pushlock button (a) and pull the
lamp off the battery.
4.2 On/Off switch (Fig. 1/Item 1)
Switching on:
Press the On/Off switch (1).
Switching off :
Press the On/Off switch (1) again.
4.3 Setting the lighting position (Fig. 3)
You can set any lighting position by moving the
lamp head (see Fig. 3).
4.4 Setting the angle of diff usion
(Fig. 4/Item 2)
You can set the angle of diff usion by turning the
setting wheel (2) to one of 2 positions.
Position A:
Small angle of diff usion
--> Small area, high level of luminance
Position B:
Large angle of diff usion
--> Large area, low level of luminance
- 10 -
23.01.2019 14:16:53 23.01.2019 14:16:53