Schneider Airsystems SGS 405 - 1/2 Notice D'utilisation D'origine page 4

GB
SGS 405 - 1/2"
Table of contents - Part 1
1.1 General information ..................
1.2 Scope of delivery ......................
1.3 Conventional use ......................
1.4 Technical data ..........................
1.5 Components.............................
1.6 Commissioning .........................
1.7 Maintenance.............................
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1 General information
Observe the safety instructions!
Read the Instruction Manual!
Note: Read and memorise part 2 of the
instruction manual!
1.4 Technical data
Power
Air consumption
Max. permissible pressure
Rotational speed
Maximum torque (quality grade 8.8)
Impact mechanism
Socket spanner adapter
Pulse sound pressure level L
as per DIN 45 635, part 20
Vibrations as per DIN ISO 8662
Overall dimensions: width x depth x height
Recommended hose diameter (inner) at L= 10 m
Weight
1.5 Components
01 Plug nipple
02 Trigger lever
03 Air regulation
04 Deflector lever
05 Drive shaft
06 Retaining ring
10 Grease nipple
11 Exhaust air guide
I/ 2
2
2
2
2
2
2
2
(at distance of 1 m)
pa
Subject to technical modifications. Illustra-
tions may deviate from the original.
1.2 Scope of delivery
– Impact wrench
– Plug nipple
– Instruction manual
1.3 Conventional use
The compressed impact wrench
is an industrial tool designed for:
Fastening and loosening or inserting and un-
screwing threaded connections in different
application areas in line with the maximum
power.
Any other type of use is considered contrary
to the intended use.
Twin-hammer impact
mechanism
153 x 55 x 216 mm
1.6 Commissioning
Note: Read and memorise part 2 of the
instruction manual!
Caution: Depressurise the unit!
1.7 Maintenance
Impact mechanism lubrication
2-3 times a year with oil:
Oil drive shaft (item 05) at gap between
drive shaft and impact mechanism hous-
ing.
0,41 kW
5 l/sec
6,3 bar
10000 rpm
405 Nm
1/2 Inches
83 dB(A)
2
4,6 m/s
9,5 mm
1,2 kg