Publicité
Les langues disponibles
Les langues disponibles
English
1. When the unit is plugged in, it will indicate the room humidity level.
2. when you set the humidity, it will indicate the humidity that you have
selected.
3. when you program the time for the unit to turn on and off, it will show the
hours.
4. When the environment humidity is lower than 35%, it will show "
5. When the environment humidity is higher than 95%, it will show "
Notes:
- Water tank must be correctly installed for the dehumidifier to operate.
- Do not remove the tank while unit is in operation.
- If you want to use drain hose to drain water away, please install the hose
according to section "continuous external draining".
Operating instructions
1. Normal operation
Press
button once to turn the unit on. The unit operates in normal mode
with the default humidity of 55%. Press it again to turn off the dehumidifier.
2. Humidity setting
Press
button and then
humidity level in the room, which can be selected from 40% to 80% at 5%
intervals. The unit will cycle on and off to maintain the level.
3. Set Fan Speed
Press
button to set the desired fan speed. It can be adjusted between
high speed and low speed.
4. Timer Setting (0 hour – 24 hours)
To turns off when power is on: Press
program the time when the unit turns off.
To turns on when the power is off: Press
program the time when the unit turns on.
To cancel the function: adjust the timer at 00.
Once turned on or off by user or entering water-full state, the unit may lose
the timing function.
6
or
key repeatedly to set the desired
button and then
button and then
"
35
"
95
or
or
Instructions for use
to
to
Publicité
