Kenwood KDC-BT652U Mode D'emploi page 27

Autoradio
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Mounting and wiring this product requires
■ ■
skills and experience. For safety's sake, leave
this work to professionals.
If you experience problems during
installation, consult your Kenwood dealer.
Reception may become poor if there are
■ ■
metal objects near the Bluetooth antenna.
Bluetooth antenna unit
For Good Reception
To assure good reception, note the following:
Communicate with the cell-phone within
■ ■
the line-of-sight distance of 10 m (30
ft). The communication range becomes
shorter depending on the surrounding
environment. The communication
range also becomes shorter when there
is an obstacle between this unit and
the cell-phone. The above maximum
communication range (10 m) is not always
assured.
A broadcast station or walkie-talkie located
■ ■
nearby can interfere with communication
due to a too strong signal.
iPod
¤ CAUTION
Install this unit in the console of your
vehicle.
Do not touch the metal part of this unit
during and shortly after the use of the
unit. Metal part such as the heat sink and
enclosure become hot.
27
English

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kdc-x696

Table des Matières