ACDelco ARS1209 Manuel Informations Du Produit page 10

NOTE
Always check the direction of the rotation before use. Do not change direction
while the tool is doing the work.
1. Place the tool on the work surface before turning the switch on. Hold the tool with
both hands to control and guide the tool over the work surface.
2. Move up the tool from the work surface before turning the tool off. Do not turn the
tool off while it is resting on the work surface.
3. Do not use the tool without a sanding paper or the work surface may be damaged.
4. Do not make any adjustments to the tool while operating.
REPLACE THE SANDING PAD
Use the hand grip the sanding pad then reverse the tool direction, the sanding pad will
be screwed off the tool.
1English1
OPERATION
English -9