Analog Audio Cables; Digital Audio Cables; Video Cables; About Video Outputs Connection - Pioneer HTP-071 Mode D'emploi

Connecting your equipment

Analog audio cables

Use stereo RCA phono cables to connect analog audio
components. These cables are typically red and white, and
you should connect the red plugs to R (right) terminals and
white plugs to L (left) terminals.
White (Left)
L
A U D
R
Red (Right)

Digital audio cables

Commercially available coaxial digital audio cables or optical
cables should be used to connect digital components to this
receiver.
C O A
X I A
Coaxial digital L
I N
audio cable O P T
Optical cable
Note
• When connecting optical cables, be careful when
inserting the plug not to damage the shutter protecting
the optical socket.
• When storing optical cable, coil loosely. The cable may be
damaged if bent around sharp corners.
• You can also use a standard RCA video cable for coaxial
digital connections.

Video cables

Standard RCA video cables
These cables are the most common type of video connection
and are used to connect to the composite video terminals.
The yellow plugs distinguish them from cables for audio.
I O
I C A
L
I N

About video outputs connection

This receiver is not loaded with a video converter. When you
use HDMI cables for connecting to the input device, the
same cables should be used for connecting to the TV.
The signals input from the analog (composite) video inputs of
this unit will not be output from the HDMI OUT.
V I D
E O
Yellow
Playback
component
Terminal for connection with source device
IN
IN
HDMI VIDEO
MONITOR
OUT
OUT
HDMI VIDEO
Terminal for connection with TV monitor
TV
Video signals can be output.
02
02
13
En