Ci-Module - YASIN U650CV-UMC Guide De L'utilisateur

digital channels.
3. Turn the TV back on. Let him automatically search for the digital channels (see page 14).
Don't forget to turn LCN on here. This may take a while.
4. Check if channels have been found.
5. Turn the TV off again.
6. Now insert your smart card into the CI module. Now insert the module with smart card into
the CI slot. Now turn on the TV again. The TV and CI module will now check each other.
This can sometimes take more than 20 minutes.
7. Your TV is now ready for use.
Removing the CI + module
1. Turn off your TV.
2. Carefully remove the module.
If a module is available, more options are available on the Cl information page of the OSD.
1. Press to enter the system setting.
MENU
2. Use /   to select the CI information and press
3. Wait until the submenu is closed.
4. Use /   to select an option and press
5. Press to save the changes and exit the menu.
EXIT
Some menu options and settings depend on the corresponding CA module. We recommend
the SMiT module.
The CA module (not included) is required when using a smart card (not included) to receive
encrypted channels.
Ensure that the CA module and the smart card are compatible with each other. This device can
read Cl + compatible modules.
The available channels depend on the CA module used, the Smart Card and of course your
provider.
CI+ module tekst
This device is equipped with a Cl + slot for using a smart card module
that enables digital display without a decoder (provider box). We
recommend the SMiT module for our TVs.
Installing a CI + module
1. Make sure the TV is in the factory settings. If the TV has not been
used, it is automatically set to the correct setting.
If you have been using the TV for some time, you must first reset
it to the factory setting. Then turn your TV off again.
2. Connect your TV to the coaxial cable. This cable transmits the
to enter the settings.
OK
to edit or open the selected function.
OK
9