cahors TVT 290 HD-T2 Manuel D'utilisation page 40

Step 3: Coaxial connections
Dolby Digital
Dolby digital bitstream audio S/PDIF can be achieved using an coaxial cable. (This cable is not
supplied.) The cable should be connected between socket 3 on the STB and the S/PDIF socket on
your Dolby Digital decoder amplifier.
Looping Out (for VCR recording)
In order to watch one channel while recording another on a VCR, connect an RF cable (not
supplied) between the LOOP OUT socket on the STB (socket 1) and the RF IN socket on your VCR.
Note that VCR recordings are only analogue, not digital.
10