Mitsubishi Electric CITY MULTI PLFY-P05NFMU-E Manuel D'utilisation page 4

Indoor unit
Masquer les pouces Voir aussi pour CITY MULTI PLFY-P05NFMU-E:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2. Parts Names
Display
The main display can be displayed in two different modes: "Full" and "Basic". The factory setting is "Full". To switch to the "Basic" mode, change the
setting on the Main display setting. (Refer to operation manual included with remote controller.)
<Full mode>
* All icons are displayed for explanation.
2 3 4 5 6
6
7
8
Room
9
0
Cool
Set temp.
1
1
Mode
@
1 Operation mode
Indoor unit operation mode appears here.
2 Preset temperature
Preset temperature appears here.
3 Clock (See the Installation Manual.)
Current time appears here.
4 Fan speed
Fan speed setting appears here.
5 Button function guide
Functions of the corresponding buttons appear here.
6
Appears when the ON/OFF operation is centrally controlled.
7
Appears when the operation mode is centrally controlled.
8
Appears when the preset temperature is centrally controlled.
9
Appears when the filter reset function is centrally controlled.
0
Indicates when filter needs maintenance.
1 Room temperature (See the Installation Manual.)
Current room temperature appears here.
2
Appears when the buttons are locked.
Most settings (except ON/OFF, mode, fan speed, temperature) can be made from the Menu screen.
(Refer to operation manual included with remote controller.)
8
9
Fri
83
F
83
F
Temp.
Fan
2
5
<Basic mode>
3
)
Cool
!
1
7
4
Mode
3
Appears when the On/Off timer, Night setback, or Auto-off timer
function is enabled.
appears when the timer is disabled by the centralized control
system.
4
Appears when the Weekly timer is enabled.
5
Appears while the units are operated in the energy-save mode. (Will
not appear on some models of indoor units)
6
Appears while the outdoor units are operated in the silent mode.
(This indication is not available for CITY MULTI models.)
7
Appears when the built-in thermistor on the remote controller is
activated to monitor the room temperature (1).
appears when the thermistor on the indoor unit is activated to
monitor the room temperature.
8
Appears when the units are operated in the energy-save mode with 3D
i-see Sensor.
9
Indicates the vane setting.
)
Indicates the louver setting.
!
Indicates the ventilation setting.
@
Appears when the preset temperature range is restricted.
2
Fri
Set temp.
83
F
Temp.
Fan
5
3
4

Publicité

Table des Matières
loading

Table des Matières