Belkin PureAV PF30 Manuel D'utilisation page 10

Hookup and Installation
Step 4
Connect High-Current Audio Filter (Delayed)
This outlet is specifically designed to filter out AC line noise while
delivering maximum current to power-hungry amplifiers and other high-
current audio components. The High-Current outlet is also equipped with
"Delay" functionality. This allows your high-current amplifier to turn on
last and turn off first, avoiding that annoying "thump" from getting to
your speakers and potentially damaging them. The High-Current outlet is
"Switched" and is controlled by the "Switched" button on the front of the
Power Console.
A. Attach Belkin PureAV power cord labels to each component's power
cord before you plug the cord into the corresponding outlet on the
Power Console.
B. AMP - Connect your main amplifier power cord to the outlet labeled
"AMP-delay".
Note: You can connect any type of high-current audio component into
the High-Current outlet. You are not limited to the components
listed above.
9