Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Basic Photographic Settings (SET-UP mode) (continued)

AUTO-OFF

If no operation is carried out for a fixed amount of time (default: about one minute), power consumption
is set to its minimum state (power almost turned OFF) to prevent battery wear. This is called the Auto
Power OFF mode. This setting allows you to set the time until the camera is set to the Auto Power OFF
mode. This function is not activated during automatic playback (
To return to the normal state from the Auto Power OFF mode, either change the mode dial or press the
shutter down fully (
[1 MIN] (default)
[2 MIN]
[3 MIN]

TIMER

Sets the delay time for when the photography is taken after the shutter button is pressed during self-
timer photography.
[2 SEC]
[10 SEC]
Page 37).
: Picture taken after a 2-second delay
: Picture taken after a 10-second delay (default)
Page 62) or in the [
- 72 -
] PC mode.

Publicité

Table des Matières
loading

Table des Matières