DURAVIT C.1 Série Notice De Montage Et D'utilisation page 8

11 X
> Tighten all connections with the wrench
until secure. Maximum torque 6 ft-lbs.
13 X
> From the underside of the sink thread the
drain body into the waste seat.
> Use plumbers putty to make up any gaps
between the ceramic and the drain.
8
MAL_57157/17.06.1
8 Nm
6 ft-lbs.
19 mm
12 X
> Clean the drain opening at the bottom of
sink.
> Place the waste seat in opening of the sink.
X 14 # C11060 005U 10, # C11060 006U 10
2
> Slide the pull rod onto lift rod.
> Tighten the bolt with a flat head
screwdriver.
1