Glow Fire Apollon Instructions De Montage page 3

CONTROL
BUTTON
AUTOMATIC SHUTDOWN
In the event of overheating, the device switches off automatically. In this case the mains plug of the
electric fireplace must be pulled out of the mains socket. The electric fireplace must cool down for
about 20 minutes before being used again. The air inlets and outlets must be kept free of dust, lint,
etc.
MAINTENANCE
Before carrying out maintenance work, the mains plug of the device must be pulled out of the mains
socket!
CLEANING
All brass parts are painted and can be easily cleaned with a soft cloth (do not use abrasives)
•
Clean the air ducts with a vacuum cleaner
•
Do not immerse the power cord or plug in water or other liquids
•
TECHNICAL SPECIFICATIONS
Operting voltage: AC 220-240V 50Hz
Power consumption: 1750-2000W
3
ON (I). Activates all functions.
OFF (O). Disables all functions on the control panel and remote control.
ON: Activates the functions of the touch control panel and the remote control. Turns on the flame.
OFF: Disables the functions of the touch control panel and the remote control. Turns off the flame.
TIMER: Controls the timer settings and switches the fireplace off at the set time. The settings range
from 0.5 hours to 7.5 hours.
FLAME "- ": Darkens the flame.
NOTE: The flame goes out when the main switch is turned off. The heating can only be activated when
the flame is switched on.
FLAME "+": Makes the flame shine brighter.
NOTE: The flame goes out when the main switch is turned off. The heating can only be activated when
the flame is switched on.
HEATER: Switches the heating on and off.
NOTE: The heating can only be activated when the flame is switched on. The heating does not switch
on when the flame is switched off.
NOTE: To protect against overheating, the heater blows cold air for 10 seconds before and after it is
switched on and off.
FUNCTION
Help protect the environment!
Please observe the local regulations: Give
old electrical equipment to a suitable one
Waste disposal point.
Glow Fire Apollon
Stand: 09/2020
Version: 1