Bartscher 150151 Mode D'emploi page 30

•
Prepare the food products for blending and put the in the tumbler.
•
The maximum operating capacity of the tumbler is 2150 ml.
•
Do not overfill the tumbler, the filling level may be determined according to the
marks on the tumbler. During processing of hot or foaming roducts and during work
at high speed fill the blending tumbler only up to 2/3 of the maximum operating
capacity of 2150 ml.
CAUTION!
Do not process the liquids or food products of temperature above
80° C in the blending tumbler. Injury hazard!
• Put the lid on the tumbler and fix
it with two protective clamps.
•
Connect the device to the single grounded socket.
•
Start the device with use of ON/OFF switch.
•
Use appropriate button to select one of the speed levels (1, 2 or 3). Level 3 is the
highest one. The buttons descriptions are illuminated in blue colour and the
selected button flashes during the operation.
•
The continuous work time for levels 1 – 3 is 1 minute. The device processes the
ingredients very quickly. After that time the device turns off automatically. Check
the consistence of processed ingredients and after the cooling phase start the
device again when required.
•
Observe the device during work and allow it to cool down after each blending
process.
•
When the ingredients are supposed to be blended shortly, use the PULSE function
with the appropriate button. That function is especially useful for ice disintegration.
When it is used the device operates for 1 second and stops for 1 second alternately.
While using that function the device is not turned off automatically and should be
stopped with use of ON/OFF button when the ingredients are sufficiently processed.
•
The ingredients may be added through the spout during the operation when required.
To do this open the transparent plug which should be closed before starting the
blender again.
• Before start close the spout with
the transparent plug.
- 29 -