Télécharger Imprimer la page

Using The Timer; Using The Child Safety Lock - Fagor 670041900 Manuel D'utilisation

Publicité

Les langues disponibles

Les langues disponibles

Using the Timer:

The timer allows you to program your desired cooking time, after which the cooktop
will turn itself off.
1.
To begin using the timer, follow steps 1-3 from the "Using Your Induction
Cooktop" section (pg. 10). Then select a function from the "Selecting A Cooking
Temperature" section (pg. 10).
2.
Press the TIMER button to begin setting your time. Tap the PLUS button to
increase the programmed time by intervals of 1 minute. To "fast advance" your
programmed time, press and hold the PLUS button until the desired time is
displayed.
If you want to decrease the time, tap the MINUS button. To "fast decrease" your
programmed time, press and hold the MINUS button until the desired time is
displayed.
Once you have selected the desired cooking time, the timer will start to count-
down and the screen will alternate between displaying the cooking temperature
and the remaining cooking time.
3.
To change the programmed time while it's counting down, tap the TIMER button
once, then use the PLUS/MINUS buttons to increase or decrease the time. To
stop the timer, press and hold the TIMER button.
NOTE: To continue using the cooktop after the programmed cooking time, press
the ON/OFF button and then the TEMP. button or select a Quick Launch function.
The cooking time can be programmed for up to 3 hours when you're at any given
temperature between 140°F - 260°F. At any temperature that is higher than 260°F
the maximum programmable cooking time is 60 minutes.
EXAMPLE: If you start cooking your meal at 180°F, you can program the timer for
up to 3 hours. If you decide to increase the temperature to 300°F while cooking,
then the cooktop detects the temperature change and will automatically drop the
timer to 60 minutes.

Using the Child Safety Lock:

To prevent children from turning the cooktop on accidentally or changing the cooking
settings, press the CHILD LOCK button. The red light on top of the button will turn on
and the cooktop will not respond to temperature, Quick Launch or timer changes. You
can press the child lock button either when the cooktop is operating, or when it's in
standby mode.
When the CHILD LOCK is on, the only two buttons that will function are the CHILD
LOCK button and the ON/OFF button.
To turn the child lock off, it is not suffi cient to just tap on the CHILD LOCK button. You
have to press and hold the button for a couple of seconds until you hear a beep and
the red light turns off.
12

Publicité

loading