Vaude TAURUS L 2P Mode D'emploi page 20

be correctly repaired as soon as possible in order
to prevent further tearing. Please contact your
retailer to do this.
• Tent pole shock cords can be retightened if neces-
sary (elasticity can wear out in very cold conditions
or due to aging). To do this irst remove the end cap
and then untie the knot in the cord. Retie the knot
further up the cord and replace the cap (W).
TECHNICAL DETAILS:
Depending on tent models, VAUDE tents feature
the following:
FEATURES/FABRICS:
SILICONISED:
• Increases tent life by 20% - a triple coating relects
damaging UV radiation to a much greater degree
than standard treatments.
• 50% more tear resistant - single-sided siliconized
materials offer c.50% more tear resistance.
• Excellent water beading properties – water simply
beads on the surface.
13
FLY:
30D POLYESTER RIPSTOP SI/PU; WATERTIGHT TO
3,000MM.
• High tear resistance with reinforcement cross
threads woven in.
• SI/PU - Polyurethane coating of the inner layer for
maximum comfort thanks to reduced accumulation
of condensation. Treble silicone coating of the
outer layer for greater tear resistance, UV resis-
tance and higher beading effect.
INNER TENT:
30D POLYESTER RIPSTOP 285T.
• 285T – tightly woven ripstop polyester. Wind,
sand and snow proof with high tear resistance and
breathability.
FLOOR:
70D POLYAMIDE 190T, PU COATED; WATER COLUMN
7.000 MM.
• Tightly woven polyamide loor with a laminated PU
coating; waterproof up to 7.000 mm.
ENGLISH