Dymo® Digital Postal Scale - Dymo M1 Guide D'utilisation

Pèse lettre numérique
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
DYMO® Digital Postal Scale
This User Guide provides instructions for
®
using your DYMO
Visit www.dymo.com/register to register
your scale.
Setting Up the Scale
The scale is powered by three AAA batteries.
To set up the scale
1. Unpack the scale.
2. Set the scale on a firm, flat surface.
3. Remove the protective covering from the
LCD display.
Inserting the Batteries
The scale uses three AAA alkaline batteries. The scale automatically
turns off after three minutes of inactivity.
To insert the battery
1. Turn the scale over.
2. Remove the battery compartment cover.
3. Insert three AAA batteries as shown.
!
Make sure to insert the batteries correctly. Inserting the
batteries backwards can damage the scale.
4. Replace battery compartment cover.
!
Remove the batteries if the scale will not be used for a long
period of time.
Turning On the Power
The scale has an Auto Shut Off feature which automatically turns off the scale after three
minutes of inactivity.
To turn the scale on
Press
on the front of the scale.
When the scale is first turned on, wait a few seconds for the scale to stabilize before weighing
items. The display shows 0 g, 0.0 oz, or 0.00 oz when ready.
To turn the scale off
Press
on the front of the scale to turn the scale off.
The scale turns off automatically after three minutes of inactivity.
Digital Postal Scale.
Power
Tare/
Zero
LCD display
Remove the
protective covering
ENG
Hold
Kg/Lb
1

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

M2

Table des Matières