3G & Wifi Connection - Archos 40d Titanium Mode D'emploi

3G & WiFi connection
3G connection
With your SIM card, you should be connected to the Internet without
any further setup. The ARCHOS will only have signal if you are in an
area covered by your provider's 3G network. When connected to the 3G
network, the 3G icon is displayed in the status bar.
Activating the mobile data
To be able to access Internet, the mobile data icon
must be activated.
1. Touch and hold the time & battery icons to reveal
the status bar.
2. Pull the white line down to display the status
dashboard.
3. Touch the status dashboard icon
4. Touch the mobile data icon
Tip:
If you encounter connection problem's, see the FAQs on www.archos.
com or contact your 3G network connection provider.
10
ARCHOS_40d_Titanium_book.indd 10
.
to activate it.
12/03/2015 16:47:41