ARIETE Blendy metal Mode D'emploi page 9

With its combination of professional and practical use, this blender is an irreplaceable kitchen aid:
- easy to use, thanks to the filler cap in the lid, which makes it possible to insert foods while the
blender is operating.
- ideal for instant recipe preparation.
- indispensable for excellent instant slush drinks.
DESCRIPTION OF THE APPLIANCE (Fig. 1)
A Filler cap
B Cover
C Goblet
D Appliance's body
E PULSE button
F Speed dial
BLENDER USE INSTRUCTIONS
- Cut up foods, such as fruit or ice, in small pieces and place them inside the goblet (C).Take care
not to exceed the maximum level indicated on the goblet.
- Place the lid (B) on the goblet (C), pressing it gently into place (Fig. 2).
- Close the opening in the top of the lid (B) by inserting the special cap (A) (Fig. 3).
- Mount the complete goblet (C) on the appliance body (D) by inserting it into the apposite grooves
(Fig. 4).
- Plug the appliance into a mains power socket.
- Start the appliance by turning the on dial (F) clockwise as far as the first or second notch to start
the blades. Pushing button (E), will start the PULSE operating mode.
If the appliance should fail to start, make sure that the goblet is correctly fitted. The appliance
is fitted with devices to prevent it from operating if the goblet is not fitted or if it has been fitted
incorrectly.
- To stop the appliance, turn the on dial (F) back to «0».
- It is possible to add foods to the blender goblet during use, by first lifting out the filler cap (A) after
switching off the appliance.
- It could become necessary to switch off the appliance several times in order to remove food
residues from the sides of the goblet. If this occurs, switch off the appliance and unplug it from
the mains power.
- Remove the filler cap and lid and use a spatula to remove any residues from the sides of the
goblet.
WARNING:
Place the foods for blending in the container and fit it to the power base before plugging the
appliance into the mains power.
Never remove the lid (B) during use.
Before blending warm liquids, always remove the filler cap (A) from the blender lid. Never
place hot liquids in the blender.
- 7 -
EN