Crown CDi Série Mode D'emploi page 27

CDi Series Power Amplifi ers
DESIRED FUNCTION
Set up Ch. 1 output for 70V/high-Z mode
Set DUAL or BRIDGE-MONO mode manually
Select a user preset
Set INPUT Y mode
Turn EQ on or off for Ch. 1 or Ch. 2
Set DELAY for Ch. 1 or Ch. 2
Set LIMITING for Ch. 1 or Ch. 2
Turn off all the DSP
Confi gure a USER PRESET
* When you call up the XOV process, Ch.1 will always be set to low frequencies and Ch. 2
will always be set to high frequencies. DO NOT connect high-frequency drivers to Ch. 1.
Operation Manual Mode d'emploi
Amplifi cateurs de puissance
HOW TO ACCESS PRESETS AND DSP PROCESSES
Bedienungsanleitung
Leistungsendstufen Amplifi cadores de potencia
(starting from the current preset screen)
Sel > Next. Press Sel. The 70V and Ch. 1 icon fl ash. Press Next to turn on or off. Choose on or
off by pressing Sel.
Sel > Next. Press Sel until the BRG icon fl ashes. Press Next to set the amplifi er to Bridge-Mono,
or press Prev to set the amplifi er to Stereo. Press Sel to select your choice.
Sel > Sel. Press Next until you see PRESET 2-20. Press Sel.
Sel > Next. Press Sel until the Y icon fl ashes. Press Next to see the three options.
Choose one by pressing Sel.
Sel > Next. Press Sel until the EQ icon fl ashes along with CH1 or CH2.
Press Next to set EQ in or out. Press Sel.
Sel > Next. Press Sel until the DEL icon fl ashes along with CH1 or CH2.
Press Next until you see the amount of delay you want, then press Sel to select it.
Sel > Next. Press Sel until the LIM icon fl ashes along with CH1 or CH2.
Press Next until you see the limiting threshold you want, then press Sel to select it.
Sel > Sel. Press Next until you see DSP OFF. Press Sel.
1. Sel > Sel .
2. Press Next until you see the desired preset. Press Sel to select it.
3. Sel > Next.
4. Press Sel until you see the DSP process you want to apply to that preset.
5. Press Next to see the processing options, then press Sel to select an option.
6. Repeat Steps 1–5 for all the processes you wish to apply to that preset. The CUSTOM ICON
will light if a factory preset has been modifi ed.
Manual de Operación
BUTTON PRESSES
page 27