Caterlite CL186 Manuel D'utilisation page 2

UK
Safety Tips
• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• Ensure the water level is between the 'MIN' and 'MAX' marks.
• Over filling of the kettle may result in boiling water being
ejected.
• Always switch off the appliance before removing from the
base.
• Only use the base supplied with the appliance.
• Do not allow the base to become wet.
• Danger of scalding - avoid steam from the spout or when
opening the lid.
• Always switch off and disconnect the power supply to the
appliance when not in use.
• Keep all packaging away from children. Dispose of the
packaging in accordance to the regulations of local authorities.
• If the power cord is damaged, it must be replaced by a
Caterlite agent or a recommended qualified technician in order
to avoid a hazard.
2
CL186-CL186 E-CK827-CK827 E_ML_A5_v3_170425.indb 2 2017/4/25 15:13