emerio MIS-122958.2 Mode D'emploi page 6

Control panel & Digital display
1. On/off button
2. Speed button
3. Mode button
4. Swing button
5. Timer button
6. Mist button
7. Normal mode
8. Natural mode
Remote control
This unit has a remote control. Please use 2x1.5V AAA batteries for this remote control. Please insert the batteries
to the remote control tightly. If it is not in use for a long time, please take the batteries out of the remote control.
The functions of the remote control buttons are the same as the functions of the buttons on the control panel.
OPERATION
Fill the water tank with cold water before use. Water tank is located at the back of the body.
Connect the appliance to a suitable power source. Then press the control panel or the remote control to choose
your desired functions.
1. ON/OFF: Press "On/Off" to turn the appliance on. It will work with the following presetting: Speed: 1 / Mode:
normal / Timer: off / Swing: off / Mist: off. The digital display shows the current room temperature.
Press "On/Off" again to turn off the appliance. The appliance will be in standby mode.
In standby mode, the unit will retain speed setting and swing function of the former settings when turn on
the unit again; but if you pull out the plug from the socket, the former settings will all be lost.
9. Sleeping mode
10. Wind speed
11. Current room temperature
12. Timer
13. Power indicator
14. Swing function
15. Mist function
16. Water shortage
- 5 -