HSM SECURIO B 22 Notice D'utilisation page 16

10 Technical data
Cutting type
Cut size (mm)
Security level DIN 66399
Cutting capacity* (sheets), A4
Cutting speed
Weight
Intake width
Power supply
Power with max. number of sheets
Energy consumption in standby mode
Operating mode
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Size W x D x H (mm)
Shredded material container volume
Sound pressure level emissions
(Idle running/ load)
A-weighted sound power level (LWAd in
idle mode)
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
This document shredder meets the applicable harmonisation legislation of the European Union:
• Low Voltage directive 2014/35/EU
• EMC directive 2014/30/EU
• RoHS directive 2011/65/EU
The EU declaration of conformity can be requested from the manufacturer.
16
Strip cut
5.8
P-2 / O-2 / P-2 / T-2 /
T-2 / E-2
70 g/m 22 - 24
2
80 g/m 17 - 19
2
80 mm/s
11 kg
230 V, 50 Hz
220 V, 60 Hz
SECURIO B 22
english
3.9 3.9 x 30
P-4 / T-4 /
E-2 E-3 / F-1
16 - 18 12 - 14
13 - 15 9 - 11
240 mm
440 W
< 2 Wh
Continuous operation
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
375 x 310 x 600
33 l
57 dB(A) / 59 dB(A)
75.0 dB
Cross cut
1.9 x 15 0.78 x 11
P-5 / T-5 / P-6 / F-3
E-4 / F-2
9 - 11
7 - 9 4 - 5
90 mm/s
12.5 kg
110 V - 120 V, 60 Hz
100 V, 50 - 60 Hz
05/2016