Jenn-Air JGC9536 Guide De L'utilisateur page 10

B
Y
EFORE
S
URFACE BURNER FAILS TO LIGHT
• Check to be sure plug is securely inserted
into receptacle.
• Check or re-set circuit breaker. Check
or replace fuse.
• Check power supply.
• Check to be sure burner is correctly
rated for your kind of gas.
• Check to be sure burner ports or ignition
ports are not clogged.
• Check to be sure ignitor is dry and
clicking. Burner will not light if ignitor is
damaged, soiled or wet. If ignitor doesn't
click, turn control knob OFF.
• Check to be sure burner cap is correctly
seated on the burner base.
C
OU ALL FOR
. S
URFACE BURNER FLAME LIFTS
OFF PORTS
• Check to be sure a pan is sitting on the
grate above.
• Contact an authorized servicer.
T
HE FLAME IS UNEVEN
• Burner ports may be clogged.
• Flame may need to be adjusted. Contact
an authorized servicer.
S
URFACE BURNER FLAME IS
YELLOW IN COLOR
• Contact an authorized servicer.
• Some yellow tips on the flame are
acceptable when using LP gas.
S
ERVICE
.
.
.
9
G -
LASS CERAMIC
SURFACE SHOWS WEAR
1.Metal marks.
• Do not slide metal pans across top.
When cool, clean with Cooktop
Cleaning Creme. See pg. 8.
2.Brown streaks and specks.
• Spills were not removed promptly.
Surface was wiped with soiled cloth
or sponge.
3.Areas with a metallic sheen.
• Mineral deposits from water and food.
4.Pitting or flaking.
• Sugary boilovers that were not
removed promptly. See pg. 8.
I
GNITER CONTINUES TO CLICK
• Be sure ignitors are dry.
.
.