Publicité
Les langues disponibles
Les langues disponibles
metallic or non-metallic surfaces can also
become very hot during use and it is therefore
advisable to always handle them with care and if
possible with the help of isothermal gloves or
other thermal protection. In case of doubt
concerning the temperature of a certain surface it
is always preferable to protect oneself.
(*) Competent qualified electrician: after-sales
department of the producer or importer or any
person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all
danger. In case of need you should return the
appliance to this electrician (www.ggv-service.de).
! BEFORE USING THE IRON, remove any labels from the soleplate and wipe any manufacturing
residue from the soleplate using a soft cloth.
FILLING THE WATER TANK
Use preferably demineralised water. If you want to use the steam dial, fill the water tank as
follows:
1)
Unplug the iron from the outlet to let it cool down and set it horizontally on a stable level
surface.
2)
Put the temperature dial to "MIN/OFF" and the variable steam dial to the
3)
To fill the water tank, open the lid of the filling opening and pour water using a measuring
cup. Never exceed the MAX mark indicated on the appliance.
4)
When ironing, unplug the appliance before refilling. Fill the water tank by holding the
appliance in horizontal position without putting down the hot soleplate, unless you have a
heat-resistant base.
TEMPERATURE SETTINGS
You can choose the temperature setting depending on the cloth to iron.
Plug in the iron. Choose the correct ironing temperature by turning the fabric selector
switch. The temperature indicator lights up. Once the desired temperature has been
reached, the temperature indicator lamp will go out.
DRY PRESSING
Turn the variable steam dial to position
Plug in the iron.
.
14
setting.
Publicité
