Hama TS35C Mode D'emploi page 6

Replacing the batteries
• Open the battery compartment (2), remove and properly dispose of
the dead batteries and insert two new AAA batteries with the correct
polarity. Then close the battery compartment cover.
Note
Before use, make sure that you insert the batteries in the measuring
station first and then in the base station.
5. Installation
Note – Installation
• We recommend initially placing the base and measuring stations in
the intended locations without installing them and making all the
settings described in 6. Operation.
• Only install the stations once the appropriate settings have been
made and a stable wireless connection is established.
Note
• The wireless transmission range between the measuring and base
stations is up to 50 metres in open spaces.
Before installation, ensure that wireless transmission will not be
disrupted by interference or obstacles like buildings, trees, vehicles,
high-voltage lines, etc.
• Before the final installation, ensure that there is sufficient reception
between the intended installation locations.
• When installing the measuring station, ensure that it is protected
from direct sunlight and rain.
5