Maintenance - Greencut GRI200XM Manuel D'utilisation

MAINTENANCE

Good maintenance will extend the life of the machine. Prolonged or constant use may require more intensive
maintenance for the machine to continue to function properly.
ATTENTION: Make sure the engine is completely shut down before performing any maintenance
or repair. This will eliminate any potential risk.
PERIODIC MAINTENANCE
MAINTENANCE
Engine oil
Air filter
Spark plug
Spark suppressor
Valve set
Fuel tank and filter
Fuel pipes
CHECKING SPARK PLUGS
Regularly check the spark plug for wear.
1. Remove the spark plug cap (1) by turning it.
2. Remove the spark plug with the supplied spark plug wrench.
3. Clean the spark plug with a copper wire brush or install a new one.
4. Mount the spark plug in reverse order.
1
EVERY
EACH
MONTH OR
USE
20H USE
Check Replace
Check Clean
Replace as necessary
EVERY EVERY
3 MONTHS YEAR O
OR 50H USE 300H USE
Change
Check and adjust
Clean
Check and adjust
61
EN
Clean