Maintenance; Replacing The Lamp; Lamp Replacement Procedure - JVC DLA-RS40 Manuel D'instructions

4

Replacing the Lamp

The lamp is a consumable item. If the image is dark or the lamp is turned off, replace the lamp
unit.
When the lamp replacement time approaches, a message is displayed on the screen and the condition
●
is indicated by the indicator. (Reference page: 16 to 17, 67)
CAUTION
● Do not insert your hands into
the opening of the lamp!
This could cause obvious
deterioration of the
equipment's function, wounds
and electric shocks.
● Do not replace the lamp
immediately after the unit has
been used, and allow a cooling
period of 1 hour or more before
replacement. The temperature
of the lamp is still high and this
may cause a burn.
● Do not apply shock to the
lamp unit. It may cause lamp
blowout.
Do not use flammable air duster
●
to clean the internal parts of the
unit. This may cause fire.
MEMO
Usable Lamp Life
● When using the "Lamp Power"
set at "Normal", the lifetime of
the lamp will be approximately
3000 hours.
This is an average lifetime and
cannot be guaranteed.
● The lamp life may not reach
3000 hours depending on the
operating conditions.
● When the lamp has reached
the end of its usable life,
deterioration progresses
rapidly.
If the picture becomes dark,
●
the tint becomes strange, or
the image flickers, promptly the
lamp unit for a new one.
Purchasing the Lamp Unit
Please consult your authorized
dealer.
■ Lamp Unit
Part No.: PK-L2210U
60

Maintenance

Lamp replacement procedure

1
2
3
4
Remove the power plug from the
outlet
Remove the lamp cover
●
Remove the screws with a
Loosen the screws on the lamp unit
Loosen the screws with a
●
Pull out the lamp unit
Grasp the handle and pull out the lamp unit.
●
screwdriver.
screwdriver.
Handle