Cd Operation; Play A Cd; F.fwd Button/Rew Button; Repeat - LEXIBOOK MARVEL SPIDER -MAN SPIDER SENSE Mode D'emploi

Play a CD

1. To play a CD, pull open the CD door, and carefully place a disc on the centre spindle with the
printed label side facing up.
2. Close the CD door and slide the function selection button to the CD position to turn the unit on. The
LED display will show the total number of tracks on the disc.
3. Press the PLAY/PAUSE button
the first track.
4. Adjust the volume control to set the sound level.
5. To suspend playing, press the PLAY/PAUSE button
PLAY indicator will go off. To resume playing, press the PLAY/PAUSE button
6. To stop playing, press the Stop
F.FWD button/REW
1. When the CD is stopped, to play your favourite track directly, locate the desired track using the
F.FWD or the REW
2. When listening to a CD, press the F.FWD
button to play the previous track.
3. To search forward or backward through the playing track, press and hold the F.FWD
REW buttons to locate a specific musical passage. The player will move forward or backward at
high speed as long as the button is pressed. Stop pressing the button to return to normal playback.
Note:
• If a disc is installed incorrectly, dirty or damaged, it will not play.
• As each track is played, the track number is shown on the display.
• To prevent damage to the disc, never open the CD door while the disc is rotating. Wait for the disc to
stop before opening the CD door. Never touch the lens when the CD door is open.
• Do not use the carrying handle when playing CD. The CD should only be used on a steady surface.

Repeat

1. To repeat continuously a single track, press the repeat button once while in play mode. The repeat
indicator will flash.
2. To repeat all the tracks, press the repeat button twice while in play mode. The repeat indicator lights
steadily.
3. To cancel the repeat function, repeatedly press the repeat button until the repeat indication goes off.
Use the program function to preselect the order in which a sequence of tracks will be played.
1. Slide the function selector to the CD position.
2. Press the program button, "01" will blink on the display.
3. Use the F.FWD or REW
sequence.
4. Press the program button again to confirm and store the track.
5. Repeat steps 3 and 4 to program the other desired tracks.
6. Press to begin playback. The tracks will be played in the programmed order.
Note:
• To cancel the program function, press the stop
• During program setting, press the stop

CD OPERATION

. The PLAY indicator will light and the CD will start playing from
button.
button
buttons and press the PLAY/PAUSE button
button to play the next track, and press the REW
CD PROGRAMED PLAY
buttons to select the first track to include in the programmed
button or open the CD door.
again. The track number will flash and the
button twice while in play mode.
once again.
.
or the
17